Beagleboard.org: BeagleY-AI
August 01, 2024
Product
![Beagleboard.org: BeagleY-AI](https://data.embeddedcomputing.com/uploads/resize/320/200/external/data.embeddedcomputing.com/uploads/articles/primary_images/1722519719.png)
Product Description:
BeagleY®-AI is a low-cost, open-source, community-supported development platform for professionals and hobbyists.
BeagleY-AI has a Raspberry Pi compatible form factor, enabling a shared accessory ecosystem.
BeagleBoard.org provides Debian Linux, Zephyr and Micropython software images and the ability to run artificial intelligence applications.
Highlights:
- Texas Instruments AM67A Arm-based vision processor
- Quad-core 64-bit Arm®Cortex®-A53 CPU subsystem at 1.4GHz
- Dual general-purpose C7x DSP with Matrix Multiply Accelerator (MMA) capable of 4 TOPs
- Arm Cortex-R5 subsystem for low-latency I/O and control
- GPU, video and vision accelerators, and other specialized processing capability
- High-speed interfaces
- PCI-Express® Gen3 single lane controller
- USB3.1-Gen1 Port
- Gigabit Ethernet
- Memory
- 4GB LPDDR4
- microSD card socket
- Board identifier EEPROM
- Networking
- BeagleBoard.org BM3301 module based on TI CC3301
- WiFi 6 (IEEE802.11ax)
- Bluetooth® 5.4 with Bluetooth Low-Energy (BLE)
- Gigabit Ethernet with power-over-Ethernet (PoE+) support via add-on
- BeagleBoard.org BM3301 module based on TI CC3301
- 3 Simultaneous Displays
- microHDMI
- OLDI (LVDS) with touchscreen support
- MIPI-DSI with touchscreen support (muxed with MIPI-CSI)
- Other I/O
- 2x MIPI CSI
- PCI-Express® Gen3 x 1 interface (requires external adapter)
- 4x USB3 (5Gbps) type-A host ports
- 1x USB2 (480Mbps) type-C device port and power input
- 40-pin expansion header
- Fan power and control connector
- Debug
- 3-pin JST-SH console UART
- 10-pin TAG-CONNECT JTAG header
Product Website Link:https://www.beagleboard.org/boards/beagley-ai
Datasheet Link:https://www.beagleboard.org/boards/beagley-ai
Buy It Now Link:https://www.beagleboard.org/boards/beagley-ai
Beagleboard.org provides design files putting the control back into the users hand with a cost of only $70.