Devkit Specifications
MicroMod ESP32 Processor
SparkFun Electronics
MicroMod is a compact interface to connect a microcontroller to various peripherals. You can generally think of the MicroMod system as a ‘brain’ plugging into a ‘carrier board’.
A MicroMod processor board is approximately 22x22mm and can insert into any MicroMod carrier board. A small screw holds the processor board in place. Whereas the original M.2 standard was designed for swapping out peripherals (user could change one solid state hard drive to a larger one) the MicroMod standard is designed for swapping out controllers (user can start with a powerful processor and then change to a low power controller to extend battery life).
| Item | Specification |
|---|---|
| Chip | Tensilica LX6 |
| Compute | 32-Bit |
| Memory | 520kB internal SRAM 16MB Flash |
| I/O and Peripherals | USB-C Analog PWM Digital I/O GPIO I2C SPI UART SDIO |
| Wireless | Bluetooth 802.11 BGN WiFi |
| Software | Arduino IDE |